Intermec CV30 CV30 Fixed Mount Computer User's Manual - Page 50
Configuring the Network Parameters for a UDP Plus Network
View all Intermec CV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 3 - Configuring the CV30 Configuring the Network Parameters for a UDP Plus Network In a UDP Plus network, the CV30 communicates with a host computer through the Intermec Application Server. The Intermec Application Server translates UDP Plus packets on the wireless network into TCP/IP packets on the wired network and vice versa. The access point acts as a bridge to allow communications between the wired network and the wireless network. To use wireless communications in a UDP Plus network 1 Go to Start > Settings > the Systems tab > Intermec Settings. 2 Configure these network parameters on the CV30: • Network name (SSID) • Controller IP address • IP settings (if not using DHCP) • Network port 3 Make sure the CV30 is talking to the network and that the network can see the CV30. 4 Configure security. For help, see "Configuring Security on the CV30" in the next section. Checking the Status of Your Wireless Connection After you configure your wireless settings, you can use iConnect to check the status of your connection. To check the status of your wireless connection 1 Tap the iConnect icon ( ) in the lower right corner of the Today screen. 2 From the menu, select Status > Wireless. The Wireless Status screen appears and checks the connection. You can also use iConnect to configure the network settings if you need to change anything by tapping Tools > Wireless Settings from the iConnect menu. 40 CV30 Fixed Mount Computer User's Manual