Intermec CV30 Intermec Terminal Emulator (ITE) Programmer's Reference Manual - Page 116

Chapter 3 - Extended Commands Return Codes for Receive Only (continued) Code E F K O P Z Description Incorrect setting for data parity. Timeout. Returned if the RS-232 receive is aborted after a key is pressed. Overrun of UART receive register. Data parity or framing error. Command not supported for this device Column 5, 22 None None None None None Return Version (#V) The Return Version extended command returns the current terminal emulation name and version to the host computer. The following table lists columns in which characters must appear. Return Version Characters Column Description 2 Begin extended command 3 Return Version command Character # V 3270 Data Stream Line 2, Column 1, is the input field large enough to hold the program name and version number followed by the # sign, as shown below, where "s" is the status. '0000/A0080 "#"/A1841s Line 24, Column 1, has the return status field. The code returned in this position tells the host the status of the extended command. The code is 0, which means good status or transaction complete. 5250 Data Stream The computer returns data and the extended command's status to the host computer in the following format: //rrccfl #s where: • rr is the row. • cc is the column. • fl is the AID key return value. • s is the status. 104 Intermec Terminal Emulator (ITE) Programmer's Reference Manual