Invacare CLTD Owners Manual - Page 36
Removing, Raising/Lowering the Elevating Legrest
View all Invacare CLTD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
SECTION 4-FRONT RIGGINGS Removing 1. Push the legrest release handle inward while rotating the elevating legrest outward. 2. Lift the legrest assembly out of the mounting tube of the wheelchair frame. 3. Repeat STEPS 1-2 for opposite side, if necessary. Mounting Pin Release Handle Elevating Legrest Mounting Tube Inside of Wheelchair NOTE: The mounting tube will be part of the seat frame or wheelchair front frame depending on wheelchair model. FIGURE 4.9 Replacing Sector Block Raising/Lowering the Elevating Legrest NOTE: For this procedure, refer to FIGURE 4.10. 1. Perform one of the following: • Raising: Lift legrest assembly up to desired height. • Lowering: Lift elevating legrest assembly up with one hand. While supporting the elevating legrest assembly (and user's leg), pull release lever up with other hand and lower legrest assembly to desired height. Release Lever Elevating Legrest Assembly FIGURE 4.10 Raising/Lowering the Elevating Legrest Compass™SPT™ 36 Part No 1122134