Invacare SPT Owners Manual - Page 62
Installing/Adjusting Anti-Tippers, Installing Anti-Tippers, Adjusting Anti-Tippers
View all Invacare SPT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
SECTION 9-WHEEL LOCKS AND ANTI-TIPPERS Installing/Adjusting Anti-Tippers NOTE: For this procedure, refer to FIGURE 9.2. NOTE: A 1½ to 2-inch clearance between the bottom of the anti-tipper wheels and the floor MUST be maintained at all times. Installing Anti-Tippers 1. Remove the anti-tippers from the accessory carton. ƽ WARNING Anti-tippers MUST be fully engaged and spring buttons fully protruding out of adjustment holes. 2. Press the release button in and insert the anti-tippers into the anti-tipper mounting bracket on the wheelchair frame until the spring button protrudes from the top adjustment hole. 3. Ensure the anti-tipper wheels are 1½ to 2-inches from the ground/floor. 4. Adjust the anti-tipper if necessary. Refer to Adjusting Anti-Tippers on page 62. Adjusting Anti-Tippers NOTE: A 1½ to 2-inch clearance between the bottom of the anti-tipper wheels and the floor MUST be maintained at all times. 1. Press the release button in and adjust the anti-tipper until the spring button protrudes from the other adjustment hole in the anti-tipper mounting bracket. Anti-Tipper Spring Button Release Button Mounting Bracket Wheelchair Frame Adjustment Hole FIGURE 9.2 Installing/Adjusting Anti-Tippers Compass™SPT™ 62 Part No 1122134