Invacare TDXSP Owners Manual 4 - Page 30

Adjustment

Page 30 highlights

6 ADJUSTMENT 6 Adjustment ƽ WARNING After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise injury or damage may result. While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result. DO NOT use the footplates as a platform. DO NOT stand on the footplates/footboard. When getting in or out of the wheelchair, make sure that the footplates are in the upward position or swing footrests towards the outside of the wheelchair. CAUTION As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced. 6.1 Footrest Height Adjustment ƽ WARNING While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result. Invacare® Van Seat 30 Part No 1143195

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

6
ADJUSTMENT
Invacare® Van Seat
30
Part No 1143195
6 Adjustment
6.1
Footrest Height Adjustment
±
WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely - otherwise
injury or damage may result.
While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving,
the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result.
DO NOT use the footplates as a platform. DO NOT stand on the footplates/footboard. When getting in or out of the
wheelchair, make sure that the footplates are in the upward position or swing footrests towards the outside of the
wheelchair.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.
±
WARNING
While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving,
the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result.