Invacare TDXSP Owners Manual 4 - Page 32

6 ADJUSTMENT 6.2 Adjusting the Height of the Manual Center Mount Footrest ƽ WARNING While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result. PINCH POINT EXISTS BETWEEN CENTER MOUNT FOOTREST AND CASTERS - There is limited clearance between center mount footrest and casters. The user's feet MUST remain on the center mount footrest while operating the wheelchair. If the user's feet are allowed to rest off the side of the center mount footrest they may come in contact with the caster possibly resulting in injury. 1. Remove the two mounting screws that secure the button head cleat to the extension housing. 2. Adjust the footrest extension tube to the desired height. 3. Secure the extension tube to the desired height with the button head cleat and mounting screws. Securely tighten. 4. Repeat STEPS 1-3 for the other extension tube. Button Head Cleat Extension Housing Mounting Screws Extension Tube Mounting Holes Extension Tube Invacare® Van Seat FIGURE 3 Adjusting the Height of the Manual Center Mount Footrest 32 Part No 1143195