Invacare TDXSP Owners Manual 4 - Page 39

Warning, Caution

Page 39 highlights

7 SETUP/MAINTENANCE Inspect/Adjust Periodically  Inspect all fasteners.  Ensure arms are secure but easy to release and adjustment levers engage properly.  Adjustable height arms operate and lock securely.  Ensure upholstery does not have any rips or tears.  Armrest pad sits flush against arm tube.  Check center mount front riggings for loose fasteners. Replace/tighten if necessary.  Check that all labels are present and legible. Replace if necessary.  Make sure drive lock-out operates properly. 7.3 Service Inspection  Every six months take your wheelchair to a qualified technician for a thorough inspection and servicing. Service inspections MUST be performed by a qualified technician. Refer to wheelchair base owner's manual for additional safety inspection and troubleshooting information. ƽ WARNING After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely otherwise injury or damage may result. CAUTION As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced. The following are recommended items to inspect during regular service inspections performed by a qualified technician. Actual items to be inspected during the service inspection may vary according to the specific wheelchair: Part No 1143195 39 Invacare® Van Seat

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

7
SETUP/MAINTENANCE
Part No 1143195
39
Invacare® Van Seat
Inspect/Adjust Periodically
Inspect all fasteners.
Ensure arms are secure but easy to release and adjustment levers engage properly.
Adjustable height arms operate and lock securely.
Ensure upholstery does not have any rips or tears.
Armrest pad sits flush against arm tube.
Check center mount front riggings for loose fasteners. Replace/tighten if necessary.
Check that all labels are present and legible. Replace if necessary.
Make sure drive lock-out operates properly.
7.3
Service Inspection
The following are recommended items to inspect during regular service inspections performed by a qualified technician. Actual items to be inspected
during the service inspection may vary according to the specific wheelchair:
Every six months take your wheelchair to a qualified technician for a thorough inspection and servicing.
Service inspections MUST be performed by a qualified technician.
Refer to wheelchair base owner’s manual for additional safety inspection and troubleshooting information.
±
WARNING
After ANY adjustments, repair or service and before use, make sure that all attaching hardware is tightened securely -
otherwise injury or damage may result.
CAUTION
As with any vehicle, the wheels and tires should be checked periodically for cracks and wear, and should be replaced.