Invacare TDXSP Owners Manual 4 - Page 33

6.3 Adjusting the Angle of the Manual Center Mount Footrest 6 ADJUSTMENT ƽ WARNING While the wheelchair is moving, minimum ground clearance for the front rigging is three inches. If the wheelchair is not moving, the front rigging MUST maintain a minimum of one inch ground clearance - otherwise personal injury and damage may result. PINCH POINT EXISTS BETWEEN CENTER MOUNT FOOTREST AND CASTERS - There is limited clearance between center mount footrest and casters. The user's feet MUST remain on the center mount footrest while operating the wheelchair. If the user's feet are allowed to rest off the side of the center mount footrest they may come in contact with the caster possibly resulting in injury.  Release lever located towards the front or center of seat frame. 1. Engage the release lever with one hand (not shown) and move the center mount footrest to the desired angle with the other hand. 2. Disengage the release lever (not shown) to lock the center mount footrest in the new position. Center Mount Footrest Footplate FIGURE 4 Adjusting the Angle of the Manual Center Mount Footrest Part No 1143195 33 Invacare® Van Seat