Invacare TREX26RP User Manual - Page 23
Folding Hammock or Sling Seat Models
View all Invacare TREX26RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Unfolding 1. Tilt the wheelchair toward you (raising the opposite wheel and caster off the ground/floor). 2. Place your hand on the top of the seat rail closest to you where the seat upholstery is attached. 3. Point your fingers and thumb to the inside of the wheelchair. 4. Press downward on the top of the seat rail until the wheelchair is fully open and the seat rails are fully seated in the H-blocks. 5. Engage both wheel locks, open the footrest/legrest for clearance and transfer into the wheelchair. Refer to Transferring To and From Other Seats on page 21. Folding Hammock or Sling Seat Models 1. Swing footrest/legrest in locked position to front of wheelchair. 2. Pivot footplates upward to vertical position. 3. With both hands, grasp the middle of the seat upholstery at the front and back edge and lift up. 4. Continue to close the wheelchair by grasping the armrest furthest from you and pulling the armrest towards you. 3 SAFETY Press DOWN on Seat Rail FIGURE 6 Unfolding and Folding Wheelchair FIGURE 7 Folding Hammock or Sling Seat Models Part No 1110546 23 Invacare® Tracer™ EX2 Wheelchair