Invacare TREX26RP User Manual - Page 46
DETAIL A, DETENT BALLS, AND DETENT PIN, Inside of, Wheelchair, Outside
![]() |
View all Invacare TREX26RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
8 REAR WHEELS ƽ WARNING Make sure the detent pin and detent balls of the quick-release axle are fully released before operating the wheelchair. The detent balls MUST be protruding past the inside of the rear wheel axle bushing for a positive lock (Detail "A"). Keep detent balls clean. Invacare recommends inserting quick-release axles with the detent pin to the inside of the wheelchair to prevent accidental release during contact activities. 5. If the detent balls are not protruding past the inside of the axle bushing or there is too much side-to-side movement of the rear wheel assembly, refer to Adjusting Quick-Release Axle on page 47. 0 DETAIL "A" DETENT BALLS AND DETENT PIN Axle Bushing Detent Balls Detent Pin Axle Mounting Positions Axle Spacer (Conventional Arms Only) Inside of Wheelchair Quick-Release Axle Outside of Wheelchair Quick-Release Axle FIGURE 2 Removing/Installing Rear Wheels - Quick-Release Axles Wheelchair Frame Rear Wheel Invacare® Tracer™ EX2 Wheelchair 46 Part No 1110546
![](/manual_guide/products/invacare-trex26rp-user-manual-46476bb/46.png)