Invacare TREX26RP User Manual - Page 36
After any adjustments, repair or service and before use, make sure all attaching hardware is
![]() |
View all Invacare TREX26RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
6 ARMS 6 Arms ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. 6.1 Adjusting Armrest Height ƽ WARNING Make sure the height adjustment lever is in the locked position before using the wheelchair. 1. Unlock the armrest by flipping the height adjustment lever on the top front of the armrest to the up (horizontal) position. 2. Adjust the armrest to one of five positions. Height adjustment lever MUST be in the unlocked position when placing armrest into the arm assembly. Locked (Vertical) Armrest 3. Lock the armrest by pressing the height adjustment lever into the down (vertical) position when the desired armrest height is achieved. 4. Repeat STEPS 1-3 for the other armrest. Height Adjustment Lever Invacare® Tracer™ EX2 Wheelchair Unlocked (Horizontal) FIGURE 1 Adjusting Armrest Height 36 Part No 1110546
![](/manual_guide/products/invacare-trex26rp-user-manual-46476bb/36.png)