Invacare TREX26RP User Manual - Page 31
Adjusting Footplate Height
View all Invacare TREX26RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
5.2 Adjusting Footplate Height Spring Button This procedure applies to the swingaway front riggings and swingaway elevating legrest. 1. Remove the front rigging assembly. Refer to Installing/Removing Front Riggings on page 30. Lay the front rigging assembly on a flat surface to simplify this procedure. 2. Pull the cam lock lever up to unlocked position. The elevating legrest has two sets of release buttons, one set above the other. Each set will be visible one at a time allowing finer footplate height adjustment. 3. Push in the release buttons and reposition the footplate assembly to the desired height. 4. Ensure that the release buttons fully protrude from holes on both sides of the front rigging support. 5. Rotate cam lock lever down to locked position. 6. Repeat this procedure for the other footplate, if necessary. 7. Reinstall the swingaway front rigging assembly. Refer to Installing/ Removing Front Riggings on page 30. 5 FRONT RIGGINGS Adjustment Holes Cam Lock Lever Front Rigging Support Release Button Footplate Assembly Swingaway footrest shown FIGURE 2 Adjusting Footplate Height - Spring Button Part No 1110546 31 Invacare® Tracer™ EX2 Wheelchair