Invacare TREX26RP User Manual - Page 38
Seat and Back
View all Invacare TREX26RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
7 SEAT AND BACK 7 Seat and Back ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely otherwise injury or damage may occur. 7.1 Replacing Back Upholstery 1. Remove the eight mounting screws and washers that secure the existing back upholstery to the back canes. 2. Remove existing back upholstery from the back canes. 3. Securely tighten the new back upholstery to the back canes with the phillips screws and washers. 7.2 Replacing Seat Upholstery 1. Remove the eight phillips screws and washers that secure the existing seat upholstery to the crossbraces. 2. Remove the existing seat upholstery from the crossbraces. 3. Ensure positioning of seat positioning strap (if used). Refer to Installing the Seat Positioning Strap page 62. 4. Install new seat upholstery by reversing STEPS 1-2. Washers Back Upholstery Mounting Screws Washers FIGURE 1 Replacing Back Upholstery Mounting Screw 16-inch Seat Depth Seat Upholstery Wheelchair Frame Invacare® Tracer™ EX2 Wheelchair FIGURE 2 Replacing Seat Upholstery 38 Part No 1110546