Invacare TREX26RP User Manual - Page 59
Options
![]() |
View all Invacare TREX26RP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
12 Options 12 OPTIONS ƽ WARNING After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely - otherwise injury or damage may occur. 12.1 Installing Amputee Bracket For this procedure, refer to FIGURE 1 on page 60. 1. Refer to the following chart or FIGURE 1 to determine the mounting position of the amputee bracket: SEAT-TO-FLOOR BRACKET AXLE SPACER POSI- SIDE OF TION (ON BRACKET) WHEELCHAIR ADULT A* DOWN RIGHT ADULT B* DOWN LEFT HEMI B* UP RIGHT HEMI A* UP LEFT * - "A" and "B" are stamped on the sides of the amputee bracket. 2. Install the amputee bracket on the wheelchair frame to the position determined in STEP 1. Make sure the axle spacer is pointing towards the outside of the wheelchair. 3. Install the two hex screws and locknuts that secure the amputee bracket to the wheelchair. 4. Install the rear wheels onto the wheelchair. Removing/Installing Rear Wheels on page 44. BRACKET MOUNTING POSITION (ON WHEELCHAIR) TOP TOP BOTTOM BOTTOM Part No 1110546 59 Invacare® Tracer™ EX2 Wheelchair
![](/manual_guide/products/invacare-trex26rp-user-manual-46476bb/59.png)