JVC DT-V17G15Z Instruction Manual - Page 16

Setting the menu (cont.) AUDIO SETTING Settings for the audio output balance, EMBEDDED AUDIO signals and level meter. Item BALANCE E.AUDIO GROUP *1 LEVEL METER SETTING *1 (Configure the following items) Content Setting value Adjust the balance between the right and left speakers. L5 - L1, 0, R1 - R5 Select the audio channel group of the EMBEDDED AUDIO signals. 1G, 2G, 1-2G, The setting values and selectable audio channels of EMBEDDED AUDIO signals are as follows. 3G, 1-3G, 1G : Channel 1/2/3/4/1+2/3+4/1 - 4 (1G) 4G, 1-4G 2G : Channel 5/6/7/8/5+6/7+8/5 - 8 (2G) 1-2G : Channel 1/2/3/4/5/6/7/8/1+2/3+4/5+6/7+8/1 - 4 (1G)/5 - 8 (2G)/1 - 8 (1G+2G) 3G : Channel 9/10/11/12/9+10/11+12/9 - 12 (3G) 1-3G : Channel 1/2/3/4/5/6/7/8/9/10/11/12/1+2/3+4/5+6/7+8/9+10/11+12/1 - 4 (1G)/ 5 - 8 (2G)/9 - 12 (3G)/1 - 8 (1G+2G)/1 - 12
1-3G) 4G : Channel 13/14/15/16/13+14/15+16/13 - 16 (4G) 1-4G : Channel 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15/16/1+2/3+4/5+6/7+8/9+10/11+12 /13+14/15+16/1 - 4 (1G)/5 - 8 (2G)/9 - 12 (3G)/13 - 16 (4G)/1 - 8 (1G+2G)/ 1 - 12 (1-3G)/1 - 16 (1-4G) • G means GROUP Adjust the level meter display for the EMBEDDED AUDIO signals. Example of the level meter display -Level meter position and audio channels Ex.: When "LEVEL METER ch" is set to "LINE" and "BAR TYPE" is set to "3COLORS" OVER LEVEL REFERENCE LEVEL Red Yellow Green LEVEL METER ch BAR TYPE REFERENCE LEVEL OVER LEVEL BAR BRIGHTNESS PEAK HOLD • The level meter with no audio signal input is displayed in white for "3COLORS", and in gray for "W.100." • You can select the position of the level meter display-top or bottom of the screen (☞ "POSITION" in "INFORMATION" on page 20). • When "PEAK HOLD" is set to "ON," the maximum level meter value will remain displayed for a set period of time. • The number of audio channels that are displayed on the level meter may vary according to sellection of "E. AUDIO GROUP". Select how the audio channels are displayed on the level meter. LINE DIVIDE : Displays the channels 1 - 8 at the left of the screen and 9 - 16 at the right. : Displays the odd channels at the left of the screen and the even channels at the right. OFF LINE DIVIDE Select the color of the level meter display. 3COLORS : Coloring for each level W.100 : White 3COLORS W.100 Select the standard input level indicated on the level meter. −20dB, −18dB Select the input level's lower limit indicated in red for the "3COLORS" display. −10dB, −8dB, −6dB, −4dB, −2dB Select the brightness of the level meter. LOW, HIGH Activates/deactivates the peak hold function of the level meter. OFF, ON *1 Memorized for each input. 16