JVC DT-V17G15Z Instruction Manual - Page 23

Display Functions to be controlled TALLY SEL Selects the color of the tally lamp SDI 1 Changes the input to "SDI 1" SDI 2 Changes the input to "SDI 2" DVI Changes the input to "DVI" Display Functions to be controlled COMPONENT Changes the input to "COMPO." VIDEO Changes the input to "VIDEO." 3G-B.DS Selects the data stream of "3G SDI LEVEL B" DUAL LINK Turns on or off "SDI DUAL LINK" A.MARKER The area marker indication S.MARKER The safety marker indication FRAME Indication of the area of the specified aspect ratio C.MARKER The center marker indication MARK.SEL Selects the items of "MARKER" *3 ASPECT Changes the aspect ratio 1:1 Displays in 1:1 mode STATUS Status display *4 L.METER Audio level meter display TIME CODE Time code display SOURCE ID ☞ "SOURCE ID" in "INFORMATION" on page 20 WAVE FORM Displays the wave form monitor (Normal or Difference) VECTOR Displays the vector scope COLOR OFF Color off SCR CHECK Screens check I/P MODE Change a mode according to the input picture MUTING Muting on/off DIMMER Change the intensity of the button lamps −−− No function Opening Short-circuiting Green Red Invalid Valid Invalid Valid Invalid Valid Invalid Valid Invalid Valid Invalid Valid DS1 DS2 Off On Off On Off On Off On Off On Non-"R-" items "R-" items 4:3 16:9 Off On ☞ "On the Status Display" on page 12 *5 Off On *6 *7 Color Off NORMAL - Monochrome *8 *9 On DARK - *3 Selects which functions in "MARKER" are activated, non-"R-" items or "R-" items (☞ "MARKER" on page 15). *4 Displays the information shown when INPUT SELECT button of the current input is pressed (☞ "On the Status Display" on page 12). While controlling with the MAKE system, the information is displayed only at the moment of short-circuiting. *5 While controlling with the MAKE system, the level meter is switched between displayed (short-circuiting) and hidden (opening). When "LEVEL METER ch" is set to "OFF," the level meter is not displayed ("NO EFFECT" appears). While controlling with the TRIGGER system, the pattern of the audio channel display is switched. *6 While controlling with the MAKE system, the available set-up options will be the setting value currently selected in "SOURCE ID" ("ON" or "AUTO" [short-circuiting]) and "OFF" (opening). While controlling with the TRIGGER system, uses the same set-up option as those in the SET-UP MENU (☞ "SOURCE ID" in "INFORMATION" on page 20). *7 While controlling with the MAKE system, the wave form monitor and vector scope is switched between displayed (short-circuiting) and hidden (opening) regardless of the "AUTO OFF" setting in the MAIN MENU. While controlling with the TRIGGER system, the screen is switched in the same way as when pressing the SCOPE button (☞ e on page 9). If the wave form monitor and vector scope are input at the same time, the wave form monitor is displayed. *8 While controlling with the MAKE system, the screen is switched between normal screen (opening) and blue screen (short-circuiting). While controlling with the TRIGGER system, the screen changes in the same way as when pressing SCREENS CHECK button (☞ q on page 9). *9 Must be controlled with the TRIGGER system. The mode is switched between "NORMAL" and "CINEMA" (This function cannot be controlled with the MAKE system). ● You cannot assign the same function to different pin terminals. ● The TRIGGER system switches each function by short-circuiting the pin terminal for about 1 second and opening it. 23