JVC DT-V17G15Z Instruction Manual - Page 8

Index of Parts and Functions Front panel Tally lamp This lamp is controlled by the tally function of the MAKE/TRIGGER terminal. • You can select the color of the tally lamp from "GREEN" or "RED." (☞ "TALLY SELECT" in "FUNCTION SETTING" on page 18 and "External Control" on page 22) • "NO EFFECT" is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work). • You cannot use the buttons for the items controlled by the MAKE system ("REMOTE ON" appears, and the lamp does not light up). 1 Speakers (stereo) The speakers emit the same audio signal emitted from the AUDIO (MONITOR OUT) terminals. (☞ 5 "AUDIO MONITOR OUT (OUT 1, OUT 2) terminals (pin jack)" on page 10) 2 VOLUME adjustment knob Adjusts the volume. 3 Picture adjustment knob PHASE: Adjusts the picture hue CHROMA: Adjusts the picture color density BRIGHT: Adjusts the picture brightness CONTRAST: Adjusts the picture contrast ● PHASE and CHROMA cannot be adjusted for certain signal formats. ● When "COMPONENT PHASE" is set to "DISABLE" and an NTSC signal is input, PHASE can be adjusted (☞ page 18). 4 MUTING button Turns off the sound (Muting). ● To cancel the function, press the button again or turn the VOLUME adjustment knob. ● Muting function is also canceled when "BALANCE" of "AUDIO SETTING" in the MAIN MENU is changed (☞ page 16). ● Muting function cannot be activated when a menu screen is displayed. 5 / / / buttons When a menu screen is displayed Selects or adjusts menu items (☞ "Menu Operations" on page 13). When no menu screen is displayed Selects the audio channels of EMBEDDED AUDIO signals (☞ "Audio Channel Selection" on page 11). ● Pressing button while holding button displays the SET-UP MENU (☞ "Menu Operations" on page 13). 8