JVC G800 Instruction Manual - Page 41
Troubleshooting
UPC - 046838008177
View all JVC G800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
TROUBLESHOOTING ENGLISH What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • Sound cannot be heard The volume level is set to the from the speakers. minimum level. Adjust it to the optimum level. General Connections are incorrect. Check the cords and connections. • This unit does not work at all. The built-in microcomputer may have functioned incorrectly due to noise, etc. Press the reset button on the control panel. (The clock setting and preset stations stored in memory are erased.) (See page 2.) • SSM (Strong-station Sequential Memory) automatic preset does not work. Signals are too weak. Store stations manually. FM/AM • Static noise while listening to the radio. The antenna is not connected firmly. Connect the antenna firmly. • Disc cannot be played back. Disc is inserted upside down. Insert the disc correctly. • CD-R/CD-RW cannot be played back. • Tracks on the CD-R/ CD-RW cannot be skipped. CD-R/CD-RW is not finalized. • Insert a finalized CD-R/ CD-RW. • Finalize the CD-R/CD-RW with the component which you used for recording. • Disc cannot be ejected. Disc is locked. Unlock the disc. (See page 16.) • Disc sound is sometimes You are driving on rough roads. Stop playback while driving on interrupted. rough roads. Disc is scratched. Change the disc. Disc Playback Connections are incorrect. Check the cords and connections. • Disc cannot be recognized ("NO DISC" appears on the display). No disc in the loading slot. Disc is inserted incorrectly. Insert a disc into the loading slot. Insert the disc correctly. The unit may have functioned incorrectly. While pressing CD/CD-CH LINE (for KD-AR800) or CD/CD-CH (for KD-G800) or CD (for KDG700), press and hold SEL (select) for more than 2 seconds to eject the disc. • When "PUSH RESET" appears on the display. There is something blocking the Press the reset button on the control movement. control panel. (See page 2.) If the reset button does not work, check the Installation/ Connection Manual (separate volume). (Ex.: You have used a longer screw than specified.) 41