JVC GV-LS2W Detailed User Guide - Page 21
Searching and connecting to the, access point, Using the WPS function
View all JVC GV-LS2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Preparation Connecting to the access point wirelessly (Wi-Fi) Using the WPS function Connect to the access point equipped with the WPS function easily. 1 Press and hold the power button to power off. 2 Disconnect the LAN cable that connects the camera to your computer. 3 Set the network mode switch to "WLAN". 4 Press and hold the power button to power on. The record button starts blinking. Wait until it stops blinking and off. 5 Enable the WPS function of the access point. (Example) Press the "WPS" button. For how to enable the WPS function, refer to the instruction manual of the access point. 6 Press and hold the "WPS" button. When the "WPS" button stops blinking and stays lit, the connection is complete. If no connection can be established within two minutes, the "WPS" button turns off. Try again, or set up manually. Searching and connecting to the access point 1 Select "WIRELESS NETWORK" in "NETWORK". If the sub settings are not displayed, click "+" on the left of "NETWORK". 2 Click the "SEARCH" button. 3 Select an access point to connect to. If your preferred access point is not in the list, click the "SEARCH AGAIN" button. It may not be found if there is a long distance or interference. 21