JVC GV-LS2W Detailed User Guide - Page 52
Problem, Check, Refer to,
View all JVC GV-LS2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Problem Camera images do not appear./ Camera images are gone. The pantilter does not work./The center position of the camera differs. Check • Camera images disappear if no operation is performed for 120 hours. Perform one of the following so that images reappear: --Press the shooting button. (Shooting starts.) --Operate the pantilter. --Press the reload button. --Disconnect and then connect the AV cable. • Do not connect the AV cable to the camera and pantilter simultaneously. • Camera images disappear automatically as it cannot transmit images 12 or more consecutive hours. Press the reload button to display images. • Connect the AC adapter to the pantilter. If the adapter is connected to the camera, the pantilter does not work. • Use the supplied LAN cable. Secure it with a stop. • Be careful not to twist the cable when securing it. • When the LAN cable is in contact with the floor, etc., the pantilter may not work properly due to cable friction. • The pantilter may not work properly when placed on a slant. • If a mic or the like is attached to the hot shoe, remove it. • Before attaching the camera to the pantilter, remove the battery from the camera. • Do not touch the camera during position adjustment. • The center position of the camera may differ slightly under circumstances such as at low temperatures; however, this is not malfunction. Refer to - page 26 page 27 page 27 page 27 page 27 page 30 page 29 page 27 page 27 Information 52