JVC GV-LS2W Detailed User Guide - Page 23
Connecting to a computer directly, Wi-Fi Direct
View all JVC GV-LS2W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Connecting to a computer directly (Wi-Fi Direct) Using the WPS function 1 Press and hold the power button to power off. Connecting manually 1 Press and hold the power button to power off. 2 Disconnect the LAN cable that connects the camera to your computer. 2 Disconnect the LAN cable that connects the camera to your computer. 3 Set the network mode switch to "DIRECT". 4 Press and hold the power button to power on. The record button starts blinking. Wait until it stops blinking and off. 5 Establish a WPS connection on the computer. For connection, refer to the instruction manual of the device. 6 Press and hold the "WPS" button. When the "WPS" button stops blinking and stays lit, the connection is complete. If no connection cannot be established within two minutes, the "WPS" button turns off. Try again, or set up manually. 3 Set the network mode switch to "DIRECT". 4 Press and hold the power button to power on. The record button starts blinking. Wait until it stops blinking and off. 5 Connect to DIRECT-**JVCCAM via wireless LAN of the computer. • For connection, refer to the instruction manual of the device. • The password is "password" at the time of purchase. Preparation 23