JVC GY-HM150U GY-HM150U ProHD Camcorder 104-page owner's manual - Page 70

Menu Display and Detailed Settings Camera Function Menu (continued) Switch Set Item * Default values are indicated in bold characters. Item FAW GAIN L GAIN M GAIN H Zoom Speed USER1 USER2 LOLUX/3 C.REVIEW/4 ZEBRA/5 REC/6 Setting Values Function None PRESET A B For assigning the FAW (Full Auto White Balance) function to a position on the [WHT.BAL] selection switch. The white balance mode is fixed at AFAWB when the [FULL AUTO] button of the camera recorder is set to AONB. None PRESET A B : FAW function is not assigned. : Assigns FAW to the PRESET position. : Assigns FAW to the A position. : Assigns FAW to the B position. AGC, 18dB, 15dB, For setting the gain value of each position on the [GAIN] selection switch. 12dB, 9dB, 6dB, 3dB, This is fixed at AAGCB when the [FULL AUTO] button of the camera recorder is set to AONB. 0dB (Default values GAIN L: 0dB, GAIN M: 9dB, GAIN H: 18dB) -2, -1 Normal 1 For setting the speed of zoom operation with the set lever (on the LCD monitor) and remote control. A-2B is the slowest setting and A1B is the fastest setting. By assigning one of the following functions to each of the [USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/[ZEBRA/5]/[REC/ 6] buttons, these buttons can be used to control the assigned function (on/off, start, switch). Set according to the shooting conditions. Usable only in the Camera mode. (Default values USER1: Focus Assist, USER2: TC/UB, LOLUX/3: Lolux, C.REVIEW/4: Clip Review, ZEBRA/5: Zebra, REC/6: Rec) Memo : ● The [REC/6] button is set to ARecB by default, and can be used to start/stop recording. The ARecB function can only be assigned to the [REC/6] button. Setting Values None Load File OK Mark Clip Cutter Trig Description No function is assigned. Assigns the function of [Load Scene File] in the [Setup File Manage] menu. (A Page 75) Assigns the function of appending/deleting OK marks while recording a clip. This function operates during shooting. (A Page 41) Assigns the function of splitting clips freely during recording. (A Page 41) Memo : ● This item cannot be used when [Slot Mode] is set to ABackupB. (A Page 64) ● This item cannot be used when [Rec Mode] is set to a value other than ANormalB or APre RecB. (A Page 64) Backup Trig AE Area Clip Review Rec Stop Assigns the function of [Backup Rec] in the [Slot Mode] menu. (A Page 64) Assigns the function of [AE Area] in the [Camera Function] menu. (A Page 65) Assigns the Clip Review function. (A Page 28) Assigns the function to stop recording. This function operates during recording only. Memo : ● When the [Rec Mode] menu is set to AClip ContinuousB or AFrame RecB, it is useful to use this as the stop button. (A Page 64) Zebra Lolux Tele Macro TC/UB Bars Focus Assist Assigns the function of [LCD/VF] menu B[Shooting Assist]B[Zebra]. (A Page 70) For switching the low-light shooting mode ON or OFF. Assigns the function of [Tele Macro] in the [Camera Function] menu. (A Page 65) Opens the [TC/UB] menu directly. (A Page 69) Assigns the function of [Bars] in the [Camera Function] menu. (A Page 65) Assigns the function of [LCD/VF] menu B[Shooting Assist]B[Focus Assist]. (A Page 70) 66