JVC GY-HM150U GY-HM150U ProHD Camcorder 104-page owner's manual - Page 99
Tally Lamps, Error Display, Status, Action, Status Screen, Menu Screen, Thumbnail Screen
View all JVC GY-HM150U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Error Display Status Screen Menu Screen Thumbnail Screen VIDEO FORMAT ^ INCORRECT MEDIA FULL ^ Status Action ● Video format of the file for Clip Review is different from the [Frame & Bit Rate] setting of the camera recorder. ● [REC] button is pressed when the media in use has no remaining space. ● Remaining space ran out during recording. Memo : ● This error may appear even when there is still remaining space displayed on a PC, etc. (A Page 20) Set [Camera Resolution] and [Frame & Bit Rate] correctly. (A Page 63) Replace the SDHC/SDXC card with a new one. READING MEDIA INFO GETTING OVERHEATED PLEASE TURN P.OFF BATTERY COM. ERROR ^ PLEASE TURN P.OFF --- ● Recording operation was performed while inserted card was being checked. ● Battery temperature rose. ● Communication error in battery has occurred. When a card is inserted, press the record button after the card slot status indicator lights up. ● Turn off the power and wait for some time before using again. ● Replace the battery. ● Replace the battery. Tally Lamps The tally lamps start blinking when the remaining space on the SDHC/SDXC card is running out during recording, or when the battery power is running low. Blinking Mode Remaining Battery Power/SDHC/SDXC Card Space Blinks slowly (once every second) Blinks quickly (2 times a second) ● Battery power is low ● Remaining recording time on SDHC/SDXC card is less than 3 minutes ● SDHC/SDXC card is full ● Error on the camera recorder 95