JVC KD HDR20 Instructions - Page 12
Using the Bluetooth ® devices, Registering a Bluetooth device - instructions
UPC - 046838037481
View all JVC KD HDR20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ENGLISH Using the Bluetooth® devices For Bluetooth operations, it is required to connect the Bluetooth adapter (KS-BTA200) (not supplied) to the CD changer jack on the rear of this unit. • Refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Refer to the list (included in the box) to check the countries where you may use the Bluetooth® function. Registering using "OPEN" Preparation: Operate the device to turn on its Bluetooth function. 1 Select "BT PHONE" or "BT AUDIO." 2 Select "NEW DEVICE." To use a Bluetooth device through the unit ("BT PHONE" and "BT AUDIO") for the first time, you need to establish Bluetooth wireless connection between the unit and the device. • Once the connection is established, it is registered in the unit even if you reset your unit. Up to five devices can be registered in total. • Only one device can be connected at a time for each source ("BT PHONE" and "BT AUDIO"). See page 28 about warning messages for Bluetooth operations. Registering a Bluetooth device Registration (Pairing) methods Use either of the following items in the Bluetooth menu to register and establish the connection with a device. • Select "BT PHONE" or "BT AUDIO" as the source to operate the Bluetooth menu. OPEN SEARCH Make the unit ready to establish a new Bluetooth connection. Connection is established by operating the Bluetooth device. Make the unit ready to establish a new Bluetooth connection. Connection is established by operating the unit. 3 Select "OPEN." 4 Enter a PIN (Personal Identification Number) code to the unit. • You can enter any number you like (1-digit to 16-digit number). [Initial: 0000] - Some devices have their own PIN code. Enter the specified PIN code to the unit. 1 Move to the next (or previous) number position. 2 Select a number. [Turn] 3 Repeat steps 1 and 2 until you finish entering a PIN code. 4 Confirm the entry. "OPEN.." flashes on the display. 12