JVC KW-NT810HDT Instruction Manual - Page 77
SiriusXM Radio operations, Activating subscription - update
View all JVC KW-NT810HDT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
ENGLISH SiriusXM Radio operations Before operating, connect the SiriusXM tuner (not supplied) to the expansion port on the rear of the unit. (☞ Installation/Connection Manual) Activating subscription 1 Select "SiriusXM" as the source. SiriusXM Tuner starts updating all the SiriusXM channels. 2 Check your Radio ID. Radio ID is labeled on the casing of the SiriusXM Tuner or the bottom of the SiriusXM Tuner unit. • You can also display the Radio ID on the screen by tuning in to Channel 0. - To hide the ID display, select any channel other than "0". 3 Contact SiriusXM on the internet at www.siriusxm.com/activatenow and enter the required information, or call 1-866-635-2349. Once activated, the unit can then be tuned to one of the available channels. Band Signal Reception indicator Preset number Channel number Channel name Category name The text information currently received [Band] Selects the band. SXM1 SXM2 SXM3 [4] [¢] Press: Selects a channel. Hold: Changes the channel rapidly. - While searching, invalid and unsubscribed channels are skipped. [ ][ ] [List] [ ] [ ] [Mode] Selects a preset channel. Displays the Category/Channel List. (☞ page 78) Selects a channel directly. (☞ page 79) Switches between preset list screen and tuner source screen. Changes the settings of the reception restrictions. (☞ page 79) 77