JVC TK-C2301WPRU Instruction Manual - Page 21
Do not connect DC 12 V and AC 24 V cables at the same, it to the nearest JVC dealer for inspection.
![]() |
View all JVC TK-C2301WPRU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Setup Note v If thin cables are used, the resistance of the cables will be high and a significant voltage drop will occur when the camera is at its maximum power consumption. Either use a thick cable with low resistance or place the power supply near to the camera and shorten the length of the cable to restrict the voltage drop at the rated current of camera to below 10 %. If voltage drop occurs during operation, the performance will be unstable. v Do not connect the AC 24 V cable to commercial power supply. If it is connected by mistake, the internal circuit may be damaged. Do not use the camera and make sure to send it to the nearest JVC dealer for inspection. v Do not connect DC 12 V and AC 24 V cables at the same time. v When connecting the DC 12 V cables, ensure that the polarities are correct. Color of the cables red: +12 V, black: GND v When using a DC 12 V power supply, ensure that the polarities of the cable are correct. E-21
![](/manual_guide/products/jvc-tkc2301wpru-instruction-manual-d54babc/21.png)