JVC TK-C2301WPRU Instruction Manual - Page 30

Conduit hole: G3/4-14 UNC TK-C2301WPRU, M25 TK-C2301WPRE, prevention wire to the camera unit

Get JVC TK-C2301WPRU PDF manuals and user guides View all JVC TK-C2301WPRU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

Installation Mounting the Camera (Continued) Mounting the Camera Using the Conduit Hole at the Bottom of the Base Conduit hole: G3/4-14 UNC (TK-C2301WPRU), M25 (TK-C2301WPRE) 1 Remove the dome cover and inner dome (A page 23) 2 Remove the camera unit from the base and mount the fall prevention wire to the camera unit ① Loosen the camera unit fastening screw (2 locations) with a screwdriver. ② Press the catch (2 locations) inwards and remove the camera from the base. ③ Remove the fall prevention wire fastening screw on the base to mount the fall prevention wire. (The fall prevention wire is not provided.) 1 2 Catches (x2) 2 1 Camera unit 1 RE2LEASE . Base 3 Wind the sealing tape Wind the sealing tape around the pipe junction (where the conduit hole thread lines with the pipe screw hole) two or more times. E-30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Mounting the Camera (Continued)
Mounting the Camera Using the Conduit Hole at the Bottom of the
Base
Conduit hole: G3/4-14 UNC (TK-C2301WPRU), M25 (TK-C2301WPRE)
1
Remove the dome cover and inner dome (
A
page 23)
2
Remove the camera unit from the base and mount the fall
prevention wire to the camera unit
①
Loosen the camera unit fastening screw (2 locations) with a
screwdriver.
②
Press the catch (2 locations) inwards and remove the camera from
the base.
③
Remove the fall prevention wire fastening screw on the base to
mount the fall prevention wire. (The fall prevention wire is not
provided.)
1
RELEASE
2
2
1
2
1
Base
Camera unit
Catches (x2)
3
Wind the sealing tape
Wind the sealing tape around the pipe junction (where the conduit hole
thread lines with the pipe screw hole) two or more times.
Installation
E-30