JVC TK-C2301WPRU Instruction Manual - Page 37

AE-37

Get JVC TK-C2301WPRU PDF manuals and user guides View all JVC TK-C2301WPRU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Adjustment 5 Fine adjust the focus ① Press and hold the [J] button. v Focus adjust mode will be activated and "FOCUS ADJUST MODE" is displayed on the monitor screen. v The contours are emphasized as the iris opens and the depth of field becomes shallow. v After adjustment, press [ K, H, I] / [SET]/[MENU] to exit focus adjust mode. The mode is also automatically deactivated after about 30 seconds. Memo v During the focus adjust mode, the electronic shutter will function automatically. As a result the screen will appear grainy. This is not a malfunction. ② Shoot the subject. ③ Confirm that the catch is at position A in the diagram, and then rotate the knob to adjust the focus to the optimum position. ④ Rotate the gear for focus adjustment knob approximately one gear tooth in the direction of the arrow in the diagram to correct the focus shift when mounting the dome cover. ⑤ Peel off the protection sheet temporarily and cover the dome cover to check the focus. After checking, paste the protection sheet back on the dome cover. . Knob Catch A Gear tooth E-37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
5
Fine adjust the focus
①
Press and hold the [
J
] button.
v
Focus adjust mode will be activated and “FOCUS ADJUST MODE”
is displayed on the monitor screen.
v
The contours are emphasized as the iris opens and the depth of
field becomes shallow.
v
After adjustment, press [
K
,
H
,
I
] / [SET]/[MENU] to exit focus
adjust mode. The mode is also automatically deactivated after
about 30 seconds.
Memo
v
During the focus adjust mode, the electronic shutter will
function automatically. As a result the screen will
appear grainy. This is not a malfunction.
②
Shoot the subject.
③
Confirm that the catch is at position A in the diagram, and then
rotate the knob to adjust the focus to the optimum position.
④
Rotate the gear for focus adjustment knob approximately one gear
tooth in the direction of the arrow in the diagram to correct the
focus shift when mounting the dome cover.
⑤
Peel off the protection sheet temporarily and cover the dome cover
to check the focus. After checking, paste the protection sheet back
on the dome cover.
A
Gear tooth
Knob
Catch
<IR LED removed>
<Continued on the following page>
Adjustment
E-37