JVC TK-C2301WPRU Instruction Manual - Page 29

Mount the dome cover, Installation, cover, the field angle may changed. If the field angle is

Get JVC TK-C2301WPRU PDF manuals and user guides View all JVC TK-C2301WPRU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 29 highlights

Installation 2 Mount the dome cover ① Clean the dust and dirt on the dome cover. ② Align the position marks (3 locations) on the camera unit and dome cover, followed by pressing in directly to mount the cover. ③ Tighten the dome cover fastening screw. Position alignment mark (x3) Dome cover Dome cover protective sheet . Note v Ensure that the silica gel (provided) has been inserted before mounting the dome cover. v Be sure to secure the dome cover firmly. If it is not firmly secured, the cover can drop or the humidity inside the camera can increase and fog up the interior of the cover. v When the cover is removed again after mounting the dome cover, the field angle may changed. If the field angle is changed, re-adjust the focus and the field angle. v Ensure that the fall prevention wire of the dome cover is not caught between the dome cover and the base. Failure to do so may prevent the dustproof and rainproof functions from working properly. E-29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
2
Mount the dome cover
①
Clean the dust and dirt on the dome cover.
②
Align the position marks (3 locations) on the camera unit and
dome cover, followed by pressing in directly to mount the cover.
③
Tighten the dome cover fastening screw.
Dome cover protective sheet
Dome cover
Position alignment
mark (x3)
Note
v
Ensure that the silica gel (provided) has been inserted
before mounting the dome cover.
v
Be sure to secure the dome cover firmly. If it is not firmly
secured, the cover can drop or the humidity inside the
camera can increase and fog up the interior of the cover.
v
When the cover is removed again after mounting the dome
cover, the field angle may changed. If the field angle is
changed, re-adjust the focus and the field angle.
v
Ensure that the fall prevention wire of the dome cover is not
caught between the dome cover and the base. Failure to do
so may prevent the dustproof and rainproof functions from
working properly.
Installation
E-29