Kenmore 2806 Use and Care Guide - Page 10

Benefits And, Features - washer model #

Page 10 highlights

1. Check the electrical requirements. Be sure that you have the correct electrical supply and the recommended grounding method. See "Electrical Requirements." 2. Check that all parts are now installed. If there is an extra part, go back through the steps to see which step was skipped. 3. Check that you have all of your tools. 4. Keep the foam packing ring from the washer tub for future relocation of the washer. Dispose of/recycle all packaging materials. 5. Check that the water faucets are on. 6. Check for leaks around faucets and inlet hoses. Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension cord. Failure to follow these instructions can result in death, fire, or electrical shock. 7. Plug into a grounded 3 prong outlet. 8. Remove any protective film or tape remaining on the washer. 9. Read "Washer Use." To test and to clean your washer, measure W of the detergent manufacturer's recommended amount of High Efficiency (HE) powdered or liquid detergent for a medium-size load and pour it into the detergent dispenser. Close the lid. Press POWER. Select a normal cycle and press START. Allow it to complete one whole cycle. BENEFITS AND FEATURES Your washer has several benefits and features that are summarized here. Some items may not apply to your model. Gentlewash TM High-Efficiency Wash System Your new top loading, high-efficiency washer saves you time by allowing you to do fewer, larger loads. It also conserves resources and also lowers your water and energy bills by using the following innovations. Auto Water Level This washer senses the load size and composition through a series of fills and wash motion. It then adjusts the water level for the best cleaning and rinsing performance. It eliminates the guesswork. The water level is just right for every wash load size. NOTE: You may notice during a cycle that the wash load is not completely submerged in water. This is normal for your washer. Auto Temperature Control (ATC) The Auto Temperature Control (ATC) on this washer electronically senses and maintains a uniform water temperature by regulating incoming water temperatures. Using ATC will help dissolve detergent. INVIZIBLE TM Agitator Your new washer works differently than most washers that you are accustomed to. The most striking difference is that the washer has an invisible agitator. It uses this new innovative agitator at the bottom of the wash basket to move your load through a mixture of water and detergent. The load is moved from the outside toward the middle with items coming up in the center and down on the outside edges. Dispensers The dispensers make your washer truly automatic. It is unnecessary for you to return to the washer during the cycle to add detergent, bleach, or fabric softener. Laundry products are automatically added to the load at the proper time in the wash cycle. Spin Speeds This washer is preset to automatically select the spin speed based on the cycle selected. Depending on your wash load, you can change the preset speeds. The spin speed on this washer is nearly twice as fast as that of a conventional washer. You may notice different sounds during a spin cycle because of this higher speed. Stain Treat (CATALYST ® Cleaning Action) The Stain Treat option helps to ensure better soil and stain removal. Stain Treat reduces the need for pretreatment and is safe for all fabrics. Water flushes through the dispenser to dissolve the detergent. The detergent mixture is then sprayed onto the load while the washer spins at low speed. This cleaning action will last up to 5 minutes depending on the cycle selected. The washer then stops spinning, fills with water to the appropriate level and continues washing with the selected cycle. High Efficiency (HE) Detergent This washer is designed for High Efficiency (HE) detergent use only. HE detergents are made to produce the right amount of suds and give the best performance in low water wash systems. Innovative Features Your new washer includes these features that help to reduce noise, increase the ease of use and improve wash performance. Electronic Controls Electronic controls with preset cycles are easy to use whether you are a beginner or an "expert." 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

1.
Check the electrical
requirements.
Be sure that you have the
correct
electrical
supply
and the recommended
grounding
method.
See "Electrical
Requirements."
2.
Check that all parts are now installed.
If there is an extra part,
go back through
the steps to see which step was skipped.
3.
Check that you have all of your tools.
4.
Keep the foam packing
ring from the washer
tub for future
relocation
of the washer.
Dispose
of/recycle
all packaging
materials.
5.
Check that the water faucets
are on.
6.
Check for leaks around faucets
and inlet hoses.
Electrical
Shock
Hazard
Plug
into
a grounded
3
prong
outlet.
Do not
remove
ground
prong.
Do not
use an adapter.
Do not
use an extension
cord.
Failure
to follow
these
instructions
can
result
in
death,
fire, or electrical
shock.
7.
Plug into a grounded
3 prong outlet.
8.
Remove
any protective
film or tape remaining
on the washer.
9.
Read "Washer Use."
To test and to clean your washer,
measure
W of the detergent
manufacturer's
recommended
amount
of High Efficiency
(HE)
powdered
or liquid detergent
for a medium-size
load and pour it
into the detergent
dispenser.
Close the lid. Press POWER. Select
a normal
cycle and press START. Allow
it to complete
one whole
cycle.
BENEFITS AND
FEATURES
Your washer
has several
benefits
and features
that are
summarized
here. Some items may not apply to your model.
Auto Water
Level
This washer senses the load size and composition
through
a
series of fills and wash motion.
It then adjusts the water
level for
the best cleaning
and rinsing performance.
It eliminates
the
guesswork.
The water level is just right for every wash load size.
NOTE: You may notice during a cycle that the wash load is not
completely
submerged
in water. This is normal for your washer.
Auto
Temperature
Control
(ATC)
The Auto Temperature
Control (ATC) on this washer electronically
senses and maintains
a uniform
water temperature
by regulating
incoming
water temperatures.
Using ATC will help dissolve
detergent.
INVIZIBLE
TM
Agitator
Your new washer
works
differently
than most washers
that you
are accustomed
to. The most striking
difference
is that the
washer has an invisible agitator.
It uses this new innovative
agitator
at the bottom
of the wash basket to move your load
through
a mixture
of water and detergent.
The load is moved
from the outside
toward
the middle with items
coming
up in the
center and down
on the outside
edges.
Dispensers
The dispensers
make your washer
truly automatic.
It is
unnecessary
for you to return to the washer during the cycle to
add detergent,
bleach,
or fabric
softener.
Laundry
products
are automatically
added to the load at the
proper
time in the wash cycle.
Spin Speeds
This washer
is preset to automatically
select
the spin speed
based on the cycle selected.
Depending
on your wash load, you
can change the preset speeds.
The spin speed on this washer
is
nearly twice
as fast as that of a conventional
washer. You may
notice different
sounds
during a spin cycle because of this higher
speed.
Stain
Treat (CATALYST
®
Cleaning
Action)
The Stain Treat option helps to ensure better soil and stain
removal.
Stain Treat reduces the need for pretreatment
and is
safe for all fabrics.
Water flushes through
the dispenser
to
dissolve
the detergent.
The detergent
mixture
is then sprayed
onto the load while the washer spins at low speed.
This cleaning
action will last up to 5 minutes
depending
on the cycle
selected.
The washer
then stops
spinning,
fills with
water to the
appropriate
level and continues
washing
with the selected
cycle.
High
Efficiency
(HE) Detergent
This washer
is designed
for High Efficiency (HE) detergent
use
only. HE detergents
are made to produce
the right amount
of
suds and give the best performance
in low water wash systems.
Gentlewash
TM
High-Efficiency
Wash System
Your new top
loading,
high-efficiency
washer saves you time by
allowing
you to do fewer, larger loads. It also conserves
resources
and also lowers your water and energy bills by using
the following
innovations.
Innovative
Features
Your new washer
includes
these features
that help to reduce
noise, increase the ease of use and improve
wash performance.
Electronic
Controls
Electronic
controls
with preset cycles
are easy to use whether
you are a beginner
or an "expert."
10