Kenmore 2806 Use and Care Guide - Page 13

Changing Modifiers and Options during the wash cycle You can change a Modifier or Option anytime before the selected Modifier or Option begins. You must: 1. Press STOP once. 2. Select the desired Modifiers and/or Options. 3. Press START. To manually drain the washer and spin the load 1. Press STOP twice to cancel the wash cycle and drain the washer. 2. Press POWER. 3. Press RINSE/DRAIN & SPIN. 4. Press 2nd RINSE. 5. Press START. When the spin is complete, the lid unlocks. Items can be removed from the washer. These lights show which portion of the cycle the washer is operating. They also indicate when you can add other garments to the wash load. STATUS Add A Garment @ Soak/ Prewash@ Wash Rinset Spin@ Clothes Clean t_ Lid Lock Clothes Clean The Clothes Clean light stays on until the lid is opened or the Stop or Power button is pressed. Lid Lock When the Lid Lock status light glows, the washer lid is locked. NOTE: You must wait until the Lid Lock light turns off before the lid can be opened. Indicator lights An indicator light shows which Cycle, Modifiers, and Options you have selected. Estimated Time Remaining Cycle time in minutes will appear in the display while you are making selections. The total cycle time will appear, including an estimated time for drain and fill times. NOTES: • The time is an estimation only and may vary depending on load size, cycle, modifiers, and options selected. • You may notice the time adjusting during the cycle. This is normal. • The cycle time may be extended if oversudsing occurs or the load is unbalanced. Turn the knob to choose the correct wash cycle for the type of load you are washing. When the knob points to a cycle, the indicator light for the cycle will glow. If the preset cycle setting for the Modifiers and Options are suitable for your wash load, you may press START to begin the wash cycle. Casual / Wrinkle Free \ Normal Express Wash Bulky / Bedding Heavy Duty - Sheets Whitest Whites i Delicate Handwash _ Colors / Towels Preset Cycle Settings For ease of use, preset cycle settings provide the recommended fabric care settings for each cycle. To use the preset cycle settings: 1. Press POWER. 2. Select the cycle you want by turning the knob. The preset cycle settings will be displayed (see following chart). NOTE: The preset cycle times may vary slightly depending on your model. 3. Press START. The wash cycle will begin. Preset Cycle Settings Cycle Preset Minutes Soil Level* Wash/Rinse Temp Whitest Whites 79 Heavy Hot/Cold (No ATC) Heavy Duty Normal 69 Heavy Hot/Cold (No ATC) 41 Normal Warm/Cold Casual/Wrinkle Free 44 Medium Light Warm/Cold Express Wash 33 Light Warm/Warm Bulky/Bedding Sheets 52 Normal Warm/Cold 49 Normal Warm/Cold Colors/Towels 45 Normal Cool/Cold Delicate/Handwash 36 Light Cool/Cold Rinse & Spin 24 Not Cold/Cold applicable Drain & Spin Clean Washer 14 Not Not applicable applicable 60 Not Not applicable applicable *Cycle time in minutes will appear in the display while you are making selections. The total cycle time will appear, including an estimated time for drain and fill times. NOTE: Load only to the top of the stainless steel basket. Overloading can cause poor cleaning. See "Starting Your Washer." 13