Kenmore 4500 Use and Care Guide - Page 17

Feature, INSTRUCTIONS, To activate, feature, To reactivate, normal, PRESS, DISPLAY, Setting, Silent

Page 17 highlights

Setting Oven Controls Note: Adjustments to the Oven Lockout, Temperature Display, and Silent Control Operation features will not affect cooking results. Setting Oven Lockout Feature The (_TOPp_ad controls the Oven Lockout feature. The Oven Lockout feature automatically locks the oven door and prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights. INSTRUCTIONS PRESS DISPLAY To activate the Oven Lockout feature 1. Press and hold _ for 3 seconds. 2. After 3 seconds "Loc" will appear, a beep will sound and "DOOR LOCKED" will flash in the display. Once the oven door is locked the '"DOOR LOCKED" indicator will stop flashing and remain on along with the "Loc" (Figure 1 ). To reactivate normal oven operation: 1. Press and hold _oP_) for 3 seconds, A beep will sound. The "DOOR LOCKED'" will flash in the display until the oven door has completely unlocked (Figure 2). 2. The wall oven is again fully operational. for 3 seconds Q for 3 seconds Figure 1 Figure 2 iiii'!jii_'_ :iiiiiiiiii:i ...!.i¸i.,...... Setting Silent Control Operation The DELAYTIME _ and FLEX CLEAN _ pads control the Silent Control operation feature. The Silent Control operation feature allows the oven control to be operated without sounds or beeps whenever necessary. If desired the control can be programmed for silent operation and later returned to operating with all the normal sounds and beeps. INSTRUCTIONS PRESS DISPLAY To change control from normal sound operation to silent control operation 1. To tell if your range is set for normal or silent operation press and hold will appear and "DELAY" will flash in the display (Figure 3). After 7 seconds "SP" (Speaker) will appear in the display, (Figure 4) 2. Press @ to switch between normal sound operation and silent operation mode. The display will show either "SP" (Figure 4) or ":=="(Figure 5). @ for 7 seconds @ Figure 3 Figure 4 If "SP" appears (Figure 4), the control will operate with normal sounds and beeps. If ":= =" appears (Figure 5), the control is in the silent operation mode. , Press change, to accept the change or press O to reject the Figure 5 Note: The control will always beep at the end of a kitchen timer period, and will beep when a set temperature has been reached, even if the control is set to silent operation. 17

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Setting
Oven
Controls
Note: Adjustments
to the Oven Lockout, Temperature
Display, and Silent Control
Operation features will not affect
cooking
results.
Setting
Oven
Lockout
Feature
The
(_TOP_
pad controls the Oven Lockout feature. The Oven Lockout feature
automatically
locks the oven door and
prevents the oven from being turned on. It does not disable the clock, Kitchen Timer or the interior oven lights.
INSTRUCTIONS
To activate
the
Oven
Lockout
feature
1.
Press and hold _
for 3 seconds.
2.
After 3 seconds "Loc"
will appear, a beep will sound and
"DOOR
LOCKED"
will flash
in
the display.
Once the oven door
is
locked the '"DOOR LOCKED"
indicator
will stop flashing
and
remain on along with the "Loc" (Figure
1).
To reactivate
normal
oven
operation:
1.
Press and hold _oP_) for 3 seconds,
A beep will sound. The
"DOOR
LOCKED'" will flash
in
the display
until the oven door
has completely
unlocked
(Figure 2).
PRESS
DISPLAY
for 3
seconds
Figure 1
Q
for
3
seconds
Figure 2
2.
The wall oven is again fully operational.
Setting
Silent
Control
Operation
The DELAYTIME
_
and FLEX CLEAN _
pads control the Silent Control operation feature. The Silent Control
operation feature allows the oven control to be operated without sounds or beeps whenever
necessary. If desired the
control can be programmed
for silent operation and later returned to operating with all the normal sounds and beeps.
INSTRUCTIONS
PRESS
DISPLAY
To change
control
from
normal
sound
operation
to
silent
control
operation
1.
To tell if your range is set for normal or silent operation
press
and hold @.
'
....
==.==will appear and "DELAY"
will flash in the
display
(Figure 3).
After 7 seconds "SP" (Speaker) will appear
in the display,
(Figure 4)
2.
Press @
to switch between
normal sound operation
and
silent operation
mode. The display will show
either
"SP"
(Figure
4) or ":=="(Figure 5).
@
for 7
seconds
@
Figure 3
Figure 4
,
If "SP" appears
(Figure 4), the control will operate with normal
sounds and beeps.
If ":= =" appears
(Figure 5), the control
is in
the silent operation
mode.
O
Press
to accept the change or press
to reject the
change,
Figure 5
Note: The control
will always
beep at the end of a kitchen timer period, and will beep when a set temperature
has been
reached,
even if the control
is set to silent operation.
iiii'!jii_'_
:iiiiiiiiii:i
.........
!ii
ΒΈ,
.....
17