Kenmore 4500 Use and Care Guide - Page 39

Self=Cleaning iNSTRUCTiONS Stopping or interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire in the oven: PRESS 1. Press 0. 2. Once the oven has cooled down for approximately 1 HOUR and the "DOOR LOCKED" icon is no longer displayed, the oven door can then be opened (Figure 1). Note: Self-Clean cycle can never be set to start more than 12 hours in advance. DISPLAY Figure 1 Adjusting Oven Temperature The temperature in the oven has been pre-set at the factory. When first using the oven, be sure to follow recipe times and temperatures. If you think the oven is cooking too hot or too cool for the temperature you select, you can adjust the actual oven temperature to be more or less than what is displayed. Before adjusting, test a recipe by using a temperature setting that is higher or lower than the recommended temperature. The baking results should help you to decide how much of an adjustment is needed. INSTRUCTIONS To adjust the oven temperature higher 1 Press _a'ke'_fio_r 6 seconds (Figure 2). • \ , 2. To increase the temperature use the number pads to enter the desired change (Example 30°F) _ (_ (Figure 3). The temperature may be increased as much as 35°F (19°C). 3. Press to accept the temperature change and the display PRESS Qdb or Note: The oven temperature adjustments made with this feature will not change the Self-Clean cycle temperature or the Broil temperature. DISPLAY _..ii.i.l........ ...ii.i...... Figure 2 will return to the time of day (Figure 4). Press G change if necessary. to reject the Figure 3 To adjust the oven temperature lower 1. Press /_yB,,_vk,_e,),for 6 seconds• 0° will appear in the display (Figure 5). 2. To decrease the temperature use the number pads to enter the desircehdange/Exa-3m0p°@Fle) @ andthenpres@s (Figure 6). The temperature may be decreased as much as 35°F (lg°C). 3. Press to accept the temperature change and the display QQ Q orC) Figure 4 Figure 5 will return to the time of day (Figure 7). Press O change if necessary. to reject the Note: The oven temperature adjustments are permanent and will stay forever in the unit memory unless you manually change it again. Even a power outage will not reset these changes. Follow the same procedure again if you wish to change it to a different setting. Figure 6 Figure 7 39