Kenmore 7800 Installation Instructions - Page 13

11. Position the oven bake burner over the orifice hood and reinstall using 2 screws, 3. Turn the Number 1.42 Natural gas broil burner orifice hood counterclockwise to remove. A A. Bake burner orifice hood B. Oven bake burner C. Oven bake burner screws To Convert Upper Oven Bake Burner 12. Repeat steps 1through 8 above for conversion of the upper oven bake burner. 13. Remove the Number .0585 Natural gas orifice spud in the upper oven and replace with a Number .038 LP gas orifice spud. 14. Reverse steps to reinstall the orifice covers, oven bake burners, oven baffles and oven bake covers in both ovens. To Convert Oven Broil Burner 1. Remove broil burner screw and set aside. 2. Remove the broil burner from the broil burner orifice hood. The broil burner will hang in the back of the oven while changing the orifice hood. A. Number 1.42 Natural gas broil burner orifice hood 4. Install the green Number .38 LP gas broil burner orifice hood, turning it clockwise 4 or 5 turns. Do not overtighten. A. Number .38 LP gas broil burner orifice hood 5. Place the broil burner on the broil burner orifice hood. Insert the broil burner Iocator pin in the hole in the oven back. 6. Position the broil burner against the roof of the oven cavity and attach with screw. A B B A. Broil burner screw B. Broil burner orifice hood C D A. Broil burner orifice hood B. Broil burner C. Broil burner locater pin D. Broil burner locater hole 13