Kenmore 7800 Installation Instructions - Page 15
Remove oven door. See Oven Door
UPC - 883049211312
View all Kenmore 7800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
2. Unscrew the hex-shaped regulator cap from the regulator and remove the regulator pin. 5. Unscrew 2 wing nuts and remove oven baffle. \ \ B A. Regulator pin B. Regulator cap 3. Flip the regulator pin over and snap pin firmly into place. A. Oven baffle B. Wing nuts 6. Remove the 2 oven bake burner screws and set aside. 7. Gentl', set the bake burner to the side. A. LP gas position B. Natural gas position 4. Screw the hex-shaped regulator cap securely back into place. Do not overtighten. To Convert Oven Bake Burners To Convert Lower Oven Bake Burner: 1. Remove oven racks from inside the oven cavity. 2. Remove oven door. See "Oven Door" section in the Use and Care Guide for oven door removal instructions. 3. Using a Phillips screwdriver, remove and set aside the 2 oven bake burner cover screws located at the front of the oven. A. Igniter and wires B. Bake burner screws 8. Unscrew and remove the cover over the orifice. A B A. Bake burner cover B. Bake burner cover screws 4. Lift up and remove oven bake burner cover. A. Orifice cover 15