Kenmore 7800 Installation Instructions - Page 16

9. Turn the Number .047 LP gas orifice hood counterclockwise to remove. // // // / / // / // // i/ A. Number .047 LP gas orifice hood 10. Install the Number .0723 Natural gas orifice hood, turning it clockwise 4 or 5 turns. Do not overtighten. To Convert Oven Broil Burner 1. Remove broil burner screw and set aside. 2. Remove the broil burner from the broil burner orifice hood. The broil burner will hang in the back of the oven while changing the orifice hood. A '\ B A. Broil burner screw B. Broil burner orifice hood 3= Turn the green Number .38 LP gas broil burner orifice hood counterclockwise to remove. A. Number .0723 Natural gas orifice hood 11. Position the oven bake burner over the orifice hood and reinstall using 2 screws. A. Number .38 LP gas broil burner orifice hood 4. Install the Number 1.42 Natural gas broil burner orifice hood, A turning it clockwise 4 or 5 turns. Do not overtighten. A. Bake burner orifice hood B. Oven bake burner C. Oven bake burner screws To Convert Upper Oven Bake Burner 12. Repeat steps 1 through 8 above for conversion of the upper oven bake burner. 13. Remove the Number .038 LP gas orifice spud in the upper oven and replace with a Number .0585 Natural gas orifice spud. 14. Reverse steps to reinstall the orifice covers, oven bake burners, oven baffles and oven bake covers in both ovens. A. Number !.42 Natural gas broil burner orifice hood 5= Place the broil burner on the broil burner orifice hood. Insert the broil burner Iocator pin in the hole in the oven back. 16