Kenmore 7857 Use and Care Guide - Page 11

Acceler-lce The Acceler-lce feature assists with temporary periods of heavy ice use by increasing ice production. • Press Acceler-lce to set the freezer to the lowest temperature settings. Press Acceler-lce again to return the freezer to the normal set point. NOTE: The Acceler-lce feature will automatically shut off in approximately 24 hours. When Acceler-lce is on, you cannot adjust the freezer temperature. @ Temperature alarm: An alarm will sound repeatedly if the freezer or refrigerator compartment temperatures exceed normal operating temperatures for an hour or more. The temperature displays will alternately show the current temperatures and the highest temperatures the compartments reached. • Press the Temp Alarm touch pad once to stop the audible alarm and alternating temperature displays. The Temp Alarm light will continue to flash until the refrigerator returns to the set temperature. Door Ajar The Door Ajar feature sounds a chime every few seconds when the refrigerator door has been left open for 5 continuous minutes. The chime will sound until the door is closed or Door Ajar is turned off. The lights bulbs will turn off if any door is left open for 6 continuous minutes. Closing all the doors for 1 second will cause the lights to come back on. • Press the Door Ajar touch pad to turn this feature on or off. The indicator light will be lit when the Door Ajar feature is on. @ Filter Reset (on some models) The Filter Reset control allows you to restart the water filter status tracking feature each time you replace your water filter. See "Water Filtration System." • Press and hold the Filter Reset touch pad for 3 seconds, until the Replace light turns off. Good Replace @ Humidity Control (on some models) The Humidity Control feature turns on a heater to help reduce moisture on the door hinge seal. Use in humid environments or when you notice moisture on the door hinge seal. The refrigerator uses more energy when Humidity Control is on. • Press Humidity Control when the environment is warm and more humid, or if you notice moisture on the door hinge seal. The indicator light will be lit when humidity control is ON. • Press Humidity Control again to turn OFF and save energy when the environment is less humid. @ Temp Alarm (on some models) The Temp Alarm feature provides temperature information in the event of a power outage. Power outage: During a power outage, if the temperatures in the refrigerator and freezer compartments exceed normal operating temperatures, the highest temperature reached will be displayed. • Press the Temp Alarm touch pad until the indicator light is lit, to turn on this feature. Press and hold Temp Alarm for 3 seconds until the indicator light goes off to turn off this feature. User Preferences The control center allows you to set user preferences, if desired. Temperature Display (F_C) This preference allows you to change the temperature display. F - Temperature in degrees Fahrenheit C - Temperature in degrees Celsius Alarm (AL) This preference allows you to turn off the sound of all alarms. ON - You will hear the alarm sound. OFF - You will not hear the alarm sound. Sabbath Mode (SAB) ON - All control center lights, interior lights and alarm tones will be disabled. OFF - All control center lights, interior lights and alarm tones will be enabled. NOTE: Press the door alarm touch pad for 3 seconds to restore all lights. To Access the User Preferences Menu: 1. Press and hold the Door Alarm touch pad for 3 seconds. The preference name will appear in the Freezer display and the preference status (F or C) or (ON or OFF) will appear in the Refrigerator display. 2. Use the Freezer Up Arrow or Down Arrow touch pads to scroll through the preference names. When the desired preference name is displayed, press the Refrigerator Up Arrow or Down Arrow touch pads to change the preference status. 3. Set your preferences by pressing and holding the Door Alarm touch pad for 3 seconds. 11