Kenmore 7857 Use and Care Guide - Page 13

_@@R,A;;@¢@_"

O'S

;:;'_,O[Y

:;,II,

u_s;l_

_+==

I _'I@=,+

,,_,,,=

i= =

<'='*

']I_!

='_"_='I_"

_'°I

Turning

the Ice Maker

On/Off

To turn the ice

maker

ON, simply

lower the wire

shutoff

arm.

To

manually

turn the ice

maker OFF,

lift the wire

shutoff

arm

to the

OFF (arm up) position

and listen for the click.

NOTE: Your ice maker has an automatic

shutoff. As ice is made,

the ice cubes will fill the ice storage

bin and the ice cubes will

raise the wire shutoff

arm to the OFF (arm up) position.

Do not

force the wire shutoff

arm up or down.

Ice Production

Rate

•

The

ice

maker should

produce

a complete

batch of ice

approximately

every 3 hours.

•

To increase ice production,

lower the freezer and refrigerator

temperature.

See "Using the Controls."

Wait 24 hours

between

adjustments.

Remember

•

Allow 24 hours to produce

the first batch of ice. Discard

the

first 3 batches

of ice produced.

•

The quality

of your ice will be only as good as the quality of

the water supplied

to your ice maker. Avoid

connecting

the

ice maker to a softened

water supply. Water softener

chemicals

(such as salt) can damage

parts of the ice maker

and lead to poor quality

ice. If a softened

water supply

cannot

be avoided,

make sure the water softener

is operating

properly

and is well maintained.

•

Do not store anything

on top of the ice maker or in the ice

storage

bin.

REFRIGERATOR FEATURES

Your model

may have some or all of these features.

important

information

to know

about

glass shelves

and covers:

Do not clean glass shelves

or covers with warm water when

they are cold.

Shelves and covers

may break

if exposed

to

sudden

temperature

changes

or impact,

such as bumping.

Tempered

glass is designed

to shatter

into many small,

pebble-size

pieces. This is normal.

Glass shelves

and covers

are heavy. Use both hands when

removing

them to avoid

dropping.

The shelves

in your refrigerator

are adjustable

to meet your

individual

storage

needs.

Storing similar

food items together

in your refrigerator

and

adjusting

the shelves

to fit different

heights

of items will make

finding the exact item you want easier. It will also reduce the

amount

of time the refrigerator

door is open, and save energy.

Shelves

and

Shelf

Frames

To remove

and replace

a shelf/shelf

frame:

1.

Remove the shelf/frame

by tilting it up at the front and lifting it

out of the shelf supports.

2.

Replace the shelf/frame

by guiding

the rear shelf hooks into

the shelf supports.

Tilt the front of the shelf up until rear shelf

hooks drop into the shelf supports.

3.

Lower the front of the shelf and make sure that the shelf is in

position.

4

To remove and replace the crisper(s):

1.

Slide crisper@)straight out to the stop. Lift the front of the

crisper(s) and slide out the rest of the way.

2.

Replace the crisper(s) by sliding back in

fully

past

the drawer

stop.

To

remove

the crisper(s)

cover:

1.

Remove

crisper(s).

2.

Holding

the glass insert firmly with

one hand, press up in

center of glass insert until it rises above the plastic frame.

Gently, slide the glass insert forward

to remove.

13

Kenmore 7857 Use and Care Guide - Page 13

Refrigerator Features

Page 13 highlights