Kenmore 7975 Use and Care Guide - Page 16

SETTING THE CONTROLS Temperature • Your refrigerator has a control pad on the dispenser that lets you regulate the temperature in the freezer and refrigerator compartments. • Initially set the refrigerator control at 37°F (3°C) and the freezer control at 0°F (-18°C). Leave it at these settings for 24 hours (one day) to stabilize. Then adjust the compartment temperature as desired. Filter • Filter Reset : When the FILTER RESET indicator light turns on, you have to change the water filter. Press the FILTER RESET button for 3 seconds to turn the indicator light off. You need to change the water filter approximately every 6 months. Light / Light Sensor • If the light is set "Auto" mode, dispenser light will automatically turn on and off according to the brightness of room detected by light sensor. • Refrigerator Temp Control: 33°F to 46°F (0°C to 8°C) The lower the number setting, the colder the refrigerator compartment will become. • Freezer Temp Control: -6°F to 8°F (-21°C to -13°C) When the setting is at a lower number, the freezer compartment becomes colder. The refrigerator compartment becomes warmer because less cold air flows into the refrigerator. Ultralce • When you touch the Ultralce button, the graphic [ _ ] will light up in the display and it continues for 24 hours. It will automatically shut off after 24 hours have passed. Or you can stop this function manually by touching the button one more time. • This function increases both icemaking and freezing capabilities. Dispenser • You can select water, crushed ice, or cubed ice by touching o,,ooob,u"-t't;o, n as you desire. _J • There could be some dripping after dispensing. • Hold your cup below the dispenser after dispensing to catch all drops. Alarm • When the power is connected to the refrigerator, door alarm is initially set off and door alarm display will show . When you touch _ button, the display will change to _( and door alram function is now activated. • When either refrigerator or the freezer door is left open for more than 60 seconds, the alarm will ding to let you know the door is open. • When you close the door, the door alarm will stop dinging. • If you want to disable the door alarm function, touch button then the door alarm display will switched to 4 Lock • When the power is initially connected to the refrigerator, Lock function is off. • If you want to activate Lock function to lock other buttons, press and hold _ button for 3 seconds or more. _ sign will be displayed and the Lock function is now enabled. • No buttons other than _.._ button will work even including dispenser button while Lock function is enabled. • To disable the Lock function, press and hold _ button for 3 seconds or more. Temperature Mode Switch Function(°F °C) • If you want to convert ,---.t°oF °C or vice versa, press and hold _ button and b. utton simultaneously for 5 seconds or more. • , CAUTION: The control display is operated by touch. Excessive moisture on the display may cause a malfunction. Please keep display clean and dry. ENSURING PROPER AIR CIRCULATION Do not block air channels with any objects or food for air circulation to prevent food loss due to the lack of cooling air. _, WARNING: If a door is open, the dispenser does not work. 16