Kenmore 7975 Use and Care Guide - Page 24

FILTER Replace the water filter when the refrigerator control pad Filter Reset indicator light turns on, or when your water dispenser or icemaker performance decreases noticeably. \ 2. Replace with a new cartridge. Take the new cartridge out of its packaging and remove protective cover from the o-rings. With cartridge knob in the vertical position, push the new filter cartridge into the cover until it stops. After changing the water filter cartridge, press and hold the Filter Reset button for 3 seconds; indicator light will go out. 1. Remove the old cartridge. Place a container under the hole of filter holder. \ Push it in firmly until you can turn it. Using its handle, twist cartridge about 1/4 turn. You will hear a snap when it clicks into place. NOTE: When filter is being removed, the water drains through the hole. Rotate the knob of the cartridge counter \ clockwise. \ 3. Flush the water system after replacing filter. Dispense water through the water dispenser for three minutes to flush the system. Pull out the filter cartridge. NOTE: To purchase replacement water filter cartridges, call 1-800-4-MY-HOME ®.Ask for part number 9990. 24