Kenmore 7975 Use and Care Guide - Page 23
Durabase, Pullout, Drawer, Divider
View all Kenmore 7975 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
DURABASE 1. To remove the Durabase, push it back to the end as much as possible. Tilt up the front of the Durabase and pull straight out. 2. To install, insert the Durabase in rail assembly. PULLOUT DRAWER To separate the drawer, push the front left and right hooks in (_) direction to pull up and remove. Then gently lift the gear part of rear left and right side of the drawer and pull it out in (_) direction. DURABASE DIVIDER The Durabase divider allows you to organize the Durabase area into sections. To install, reposition the gear part of rear left and right side of the drawer after pulling out both rails as much as possible, and gently push down both left and right side while checking the hook on the front part. • , WARNING: If the Durabase divider is removed, there is enough open space for children or pets to crawl inside. To prevent accidental child and pet entrapment or suffocation risk, DO NOT allow them to play inside of drawer. 23