Kenmore 7975 Use and Care Guide - Page 20

REFRIGERATOR SHELVES The shelves in your refrigerator are adjustable to meet your individual storage needs. Your model may have glass or wire shelves. Storing similar food items together in your refrigerator and adjusting the shelves to fit different heights of items will make finding the exact item you want easier; it will also reduce the amount of time the refrigerator door is open, saving energy. IMPORTANT: Do not clean glass shelves with warm water when they are cold. Shelves may break if exposed to sudden temperature changes or impact, such as bumping. For your protection, glass shelves are made with tempered glass, which will shatter into small pebblesized pieces. NOTE: Glass shelves are heavy. Use special care when removing them to avoid dropping them. Adjusting Shelves Remove shelves from the shipping position and replace shelves in the position you want. • To remove a shelf--Tilt up the front of the shelf in the direction of (1) and lift it in the direction of (2). Pull the shelf out. _, CAUTION: Make sure that shelves are level from one side to the other. Failure to do so may result in the shelf falling or spilling food. Folding Shelf You can store taller items such as a gallon container or bottles by simply pushing the front half of shelf underneath back half of shelf. Pull toward you to returm to a full shelf. BOTTLE HOLDER (795.7974*, 7976* Model Only) Bottles can be stored laterally with this bottle holder. It can be attached to any shelf. iC _c • To reinstall a shelf--Tilt the front of the shelf up and guide the shelf hooks into the slots at a desired height. Then lower the front of the shelf so that the hooks drop into the slots. Bottle holder can be removed by pulling it straight out and installed by placing it at the end of the shelf you want and pushing it inward. 20