Kenwood 915DVD Instruction Manual - Page 33

English Setup Menu DTA Setup Manually set the sound output timing of each channel. 1 Display the DTA Setup screen DTA (P60 6) DTA Setup screen DTA 1 Front 0.50feet 2 2 3 Preset 4 Return 1 Selects a speaker to be adjusted. 2 Sets a delay time of the selected speaker. 3 Stores the adjusted status in memory or calls it from memory. 4 Returns to the Car Type Set Up screen. 2 Select a speaker you wish to adjust 3 Set a delay time The speakers are virtually moved to the desired distance. When the values of center speaker and front speakers increase, they are virtually moved forward. When the values of rear speakers and subwoofer increase, they are virtually moved backward. Store or call your setup into/from memory To store your setup in memory Preset Continue to touch more than 2 seconds. To call your setup from memory Preset You can also call the setup from memory by touching Preset 7 on the Car Type Set Up screen. 1 2 2 3 3 4 1 Center speaker 2 Front speaker 3 Rear speaker 4 Subwoofer Crossover Network Setup You can manually set a crossover frequency of speakers. X'Over (P61 w) LPF Frequency 1 Slope 2 18dB/Oct 100Hz 1kHz 1 Phase Normal 4 2 3 Return Speaker Setup Memory You can store all of speaker and crossover setup in memory simultaneously. To store your setup in memory Preset (P61 q) Continue to touch more than 2 seconds. To call your setup from memory Preset (P61 q) 1 Sets a crossover frequency. 2 Sets a crossover slope. 3 Returns to the Speaker Set Up screen. 4 Sets the phase of subwoofer output (it is displayed when the subwoofer crossover frequency is set). The phase is reversed 180 degrees when set to "Reverse". • When you select a speaker type from the Speaker Setup screen, the crossover frequency setup is erased. • During crossover setup, the speaker type is set to "USER" on the Speaker Set Up screen. 64 English English 65