Kenwood 915DVD Instruction Manual - Page 40

English Setup Menu Security Code Setup You can set a security code to protect your receiver system against theft. When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 Display the Security Code Setup screen Security If Security or Next is not shown, touch Prev. to display it. 1 4 3 2 1 5 Set 1 1 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Sound Effects Menu. (see page 86) 4 Calls the Setup Menu. 5 Allows you to start security code registration. If you have already completed the code registration, the Set is not displayed. 78 English 2 Start the security code registration Set PassWord 1st 1 1 2 3 4 5 6 7 8 9 0 2 Clear 3 Cancel 4 Enter 1 Enters a security code. 2 Clears your entry. 3 Cancels the registration and returns to the Security Code Setup screen. 4 Enters the security code. 3 Enter a security code 0 -9 Input a four-digit number. 4 Register your security code Enter 5 Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation. If you enter a different security code, the screen returns to Step 3 (for the first code entry). 6 Register the security code again Enter Your security code has been registered. If you press the Reset button or if you disconnect your Receiver from the battery after the code registration, you need to enter the registered security code. See below for details. If you have pressed the Reset button or if you have disconnected the Receiver from battery... 1 Enter the correct security code 0 - 9 You must enter the same security code as that you have entered in Step 3 above. 2 Enter the security code Enter Now, you can use your Receiver. English 79