Kenwood DDX4017BT Instruction Manual - Page 68
Connecting wires to terminals for DDX7017BT/DDX7017BTM
View all Kenwood DDX4017BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
CONNECTION/INSTALLATION ❏ Connecting wires to terminals for DDX7017BT/DDX7017BTM See page 71. 10 A fuse See page 71. See page 71. See page 71. 1 See page 72. FRONT VIEW CAMERA REAR VIEW CAMERA VIDEO OUT Connect the antenna cord to the antenna terminal. Purple with white stripe (Reverse sensor wire) Light green (Parking sensor wire) USB terminal (1.0 m): See page 70. See page 71. See page 71. See page 71. Connect to the vehicle's reverse lamp harness when using the optional rear view camera. 3 Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. White ª / White with black stripe · : To front/mid range speaker (left)*1 Gray ª / Gray with black stripe · : To front/mid range speaker (right)*1 Green ª / Green with black stripe · : To rear/tweeter speaker (left)*1 *1 For 3 way speaker system connection, see also page 72. *2 If no connections are made, do not let the cable come out from the tab. Purple ª / Purple with black stripe · : To rear/tweeter speaker (right)*1 *2 Light blue with yellow stripe (Steering remote control wire) To the remote adapter (not supplied) which is compatible with your car. Brown (Mute control wire) Blue with white stripe (Power control wire/Antenna control wire) (12 V 350 mA) Not used. To the power control terminal when using the optional power amplifier. (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna. Orange with white stripe (Dimmer control wire) To car light control switch. Ignition key switch Red (Ignition wire) Yellow (Battery wire) Fuse box Black (Ground wire) To car chassis Battery 68