Kenwood DDX4017BT Instruction Manual - Page 69

CONNECTION/INSTALLATION ❏ Connecting wires to terminals for DDX717WBT/DDX717WBTM (for Toyota Cars) See page 71. *1 If no connections are made, do not let the cable come out from the tab. *2 For 3 way speaker system connection, see also page 72. See page 72. 10 A fuse See page 71. See page 71. 1 FRONT VIEW CAMERA REAR VIEW CAMERA VIDEO OUT Connect the antenna cord to the antenna terminal. Purple with white stripe (Reverse sensor wire) Connect to the vehicle's reverse lamp harness when using the optional rear view camera. Light green (Parking sensor wire) 3 USB terminal (1.0 m): See page 70. See page 71. See page 71. See page 71. Connect to the vehicle's parking brake detection switch harness. • For best safety, be sure to connect the parking sensor. Connector D 6 Connect to the vehicle's steering remote harness. % % % • Depending on the type of vehicle, it cannot be connected. Blue with white stripe (Power control wire) (12 V 200 mA) Brown (Mute control wire) *1 Connect to power control terminal when using the optional power amplifier. Not used. Connector B Connect to the vehicle's harness. Connector A Connect to the vehicle's harness. Pin A1 A2 A4 A5 A6 A8/A7 A10/A9 B2/B1 B6/B5 D21 D22 D23 Color and functions of Connector A, B and D Orange/White Dimmer Yellow Battery Red Ignition (ACC) Blue Antenna control (12 V 300 mA) Black Ground connection White ª / White/Black · Left speaker (front/mid range)*2 Gray ª / Gray/Black · Right speaker (front/mid range)*2 Green ª / Green/Black · Left speaker (rear/tweeter)*2 Purple ª / Purple/Black · Right speaker (rear/tweeter)*2 White Input 1 Red Input 2 Black Ground ENGLISH 69