Kenwood DDX4018DAB Instruction Manual - Page 29
Other External Components
View all Kenwood DDX4018DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Other External Components AV-IN Connecting an external component See page 46 for more information. Starting playback 1 Select "AV-IN" as the source. 2 Turn on the connected component and start playing the source. Changing the AV-IN name You can change the AV-IN name displayed on the source control screen. • This setting does not affect the source name displayed on the Home screen. 1 Display the screen. On the source control screen, touch as follows: 2 Select an AV-IN name. Rear view camera Install the rear view camera (separately purchased) in the appropriate position according to the instructions supplied with the rear view camera. Connecting a rear view camera See page 46 for more information. • To use the rear view camera, a reverse lead (REVERSE) connection is required. (Page 45) Using the rear view camera • For rear camera settings, see on page 37. To display the rear view camera screen The rear view screen is displayed by shifting the gear to the reverse (R) position when is set to [ON]. (Page 37) • A caution message appears on the screen. To remove the caution message, touch the screen. You can also display the picture from the rear view camera manually without shifting the gear to the reverse (R) position. On the pop-up short-cut menu, touch as follows: Operations while the camera screen is displayed To adjust the picture Touch the area shown below. Video menu control is shown. For details, see "Video menu control operations" on page 12. • To exit video menu control, touch the same area again. To display parking guide line Set to [ON] (Page 37) or touch the area shown below. • To close the parking guidelines, touch the same area again. To exit the camera screen Press HOME on the monitor panel or touch the area shown below. ENGLISH 25