Kenwood DDX4018DAB Instruction Manual - Page 38

<Time Alignment&gt

Get Kenwood DDX4018DAB PDF manuals and user guides View all Kenwood DDX4018DAB manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Settings 3 Adjust the crossover frequency of the selected speaker. • Adjustable items vary depending on the selected speaker type/speaker size/crossover settings. / Adjusts the output volume of the tweeter (left/ right). Adjusts the crossover frequency for the tweeter. Adjusts the output volume of the selected speaker. Adjusts the crossover frequency for the front or rear speakers (high pass filter). Adjusts the crossover frequency for the speaker (low pass filter). Adjusts the crossover slope. Selects the phase for the speaker. Make fine adjustments to the delay time of the speaker output to create a more suitable environment for your car. Select the listening position (1), select [Distance] or [Gain](2) to make an adjustment , then adjust each speaker setting (3). 1 Select from , , or . • is selectable only when

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
Settings
Settings
3
Adjust the crossover frequency of the
selected speaker.
• Adjustable items vary depending on the selected
speaker type/speaker size/crossover settings.
<TW Gain (L)>/<TW Gain (R)>
Adjusts the output volume of the tweeter (left/
right).
<TW FREQ>
Adjusts the crossover frequency for the tweeter.
<Gain>
Adjusts the output volume of the selected speaker.
<HPF FREQ>
Adjusts the crossover frequency for the front or rear
speakers (high pass filter).
<LPF FREQ>
Adjusts the crossover frequency for the speaker
(low pass filter).
<Slope>
Adjusts the crossover slope.
<Phase>
Selects the phase for the speaker.
<Time Alignment>
Make fine adjustments to the delay time of the speaker
output to create a more suitable environment for your
car.
Select the listening position (
1
), select
[Distance] or [Gain](
2
) to make an
adjustment , then adjust each speaker
setting (
3
).
1
Select from
<All>
,
<Front L>
,
<Front R>
or
<Front All>
.
•
<Front All>
is selectable only when
<X’over
Network>
is set to
[2way]
. (Page33)
2
Select an item to adjust.
[Distance]
Adjusts the digital time alignment
value.
[Gain]
Adjusts the output volume of the
selected speaker.
3
To determine the adjustment value, see the
following “Determining the value for <Position
DTA> adjustment”.
To initialize the setting value:
Touch
[Initialize]
.
Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1
Determine the center of the currently set
listening position as the reference point.
2
Measure the distances from the reference point
to the speakers.
3
Calculate the differences between the distance of
the furthest speaker and other speakers.
4
Set the DTA value calculated in step
3
for
individual speakers.
5
Adjust gain for individual speakers.
E.g. When
<Front All>
is selected as the listening
position
+90 cm
60 cm
80 cm
+70 cm
150 cm
+0 cm
34
ENGLISH