Kenwood DDX4018DAB Instruction Manual - Page 32
Bluetooth mobile phone
View all Kenwood DDX4018DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Bluetooth® 2 Select the device (1) you want to connect, then select [Connection] (2). 3 Select the device (1) to connect, then return to the (2). Select [ON] (to connect) or [OFF] (to disconnect). : Mobile phone : Audio device 4 Connect the selected device. 28 ENGLISH • The status is shown as follows: - : Connection is in progress. - : A connection has been established. - : A connection can be established. - : Disconnection is in progress. - : No connection is established. • When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed when the information is acquired from the device. To delete the registered device: Perform step 1, select the device you want to delete in step 2, then touch [Remove]. • A confirmation message appears. Touch [Yes]. Bluetooth mobile phone When a call comes in... Touching the operation keys performs the following actions: [ ] Answers a call. [ ] Rejects a call. • Call information is displayed if acquired. • Phone operation is not available while the picture from the rear view camera is displayed. • When receiving a call during navigation guidance (only for DDX4018DAB/DDX4018BT), the screen is switched automatically. - To return to the navigation screen, touch [ ]. During a call... Touching the operation keys performs the following actions: [ ] [ ]/ [ ] [DTMF] NR LEVEL [-] / [+] EC LEVEL [-] / [+] MIC LEVEL [-] / [+] Ends a call. Switches between handsfree mode and phone mode. Enters DTMF (Dual Tone Multi Frequency), then sends text using the keypad. Adjusts the noise reduction level. (-5 to 5, initial 0) Adjusts the echo volume level. (-5 to 5, initial 0) Adjusts the volume level of the microphone. (-10 to 10, initial -4) • Press + / - buttons on the monitor panel to adjust the volume of the call or earpiece.