Kenwood DDX4018DAB Instruction Manual - Page 36
Settings
View all Kenwood DDX4018DAB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Settings Audio settings Display the screen. On the Home screen, touch as follows: Then, on the screen, touch [Audio]. E.g. Audio settings screen for DDX4018BT You cannot change the screen in the following situations: • When the AV source is turned off. • When the Bluetooth phone is used (making or receiving a call, during a call, or while voice dialling). • During navigation guidance* * Only for DDX4018DAB/DDX4018BT. The following adjustments are memorized for each source until you adjust the sound again. If the source is a disc, the adjustments are stored for each of the following categories. • DVD/VCD • CD • DivX/MPEG1/MPEG2/MP3/WMA/WAV/AAC/FLAC You cannot adjust the sound when the unit is in standby. 32 ENGLISH Selecting a preset sound mode Select a preset sound mode on the screen. • Natural (Initial)/Rock/Pops/Easy/Top40/Jazz/ Powerful/User • To apply the adjusted equalizer to all playback sources, touch [ALL SRC], then touch [OK] to confirm. Store your own sound adjustments 1 Select a preset sound mode. 2 Select a band (1) and adjust the level (2), then adjust the sound (3). Adjust the sound as follows: Adjusts the width of the frequency. • 1.35/1.5 (Initial)/2.0 Activates/deactivates bass. • ON/OFF (Initial) Adjusts the subwoofer level.* • -50 to +10 (Initial: 0) To clear the adjustment, touch [EQ INIT]. 3 Repeat step 2 to adjust the level of other bands. * Not adjustable when is selected for subwoofer on the screen. (Page33) Adjust the sound effect. Adjusts loudness. • OFF (Initial)/Low/High Selects the bass boost level. • OFF (Initial)/Level 1/Level 2/Level 3/Level 4/Level 5 Reduces the driving noise by raising the bandwidth. • OFF (Initial)/ON *1 Virtually enhances the sound space using the Digital Signal Processor (DSP) system. Select the enhance level. • OFF (Initial)/Small/Medium/Large